Description
x
- Package include:
- pcp air compressor *1, Instruction manual *1, Fitting kit *1, 110v-12V Power Supply*1
- Specifications:
- Power: 350W
- Voltage: 110V/220V AC voltage or 12V car battery
- Motor speed: 2700r/min
- Air output: 11 l/min
- Weight: 33lbs
- Noise level: 70 decibels
- Cooling system: water cooling system + fan cooling
- Automatic stop
- Moisture filter: built-in
- Maximum working pressure: 400bars/5800psi
- Continuous working time: 4 to 5 hours
- Maximum cylinder capacity: 6.8L
- Note:
- 1,For the first use, it must be filled with 500ml of pure water or antifreeze before turning on power.
- 2 ,Do not turn the grease knob until after 4-6 hours of use, then turn it one turn. otherwise will cause bad performance.
- 3,Please release the bleed valve first after finishing the inflation, and do not start it when there is still air pressure inside your compressor.
- Notice:
- This CS4 model was designed with 2 stages of check valve inside. When working, it does not leak. but after turn off power, it may leak pressure from the second stage check valve. For example, 300 bar drops to 200bar in several minutes. This is normal and please don't worry.
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|
| GX-E-CS4 PCP Compressor | GX-E-CS3-i PCP Compressor | GX-E-CS3 PCP Compressor | GX-E-CS2 PCP Compressor | GX-E-5K2 PCP Compressor | |
| Voltage | 12v | 12v | 12v | 12v | 110V |
| 12V converter | external | built-in | external | external | |
| Max pressure | 40MPA/5800PSI | 4500psi/30mpa | 4500psi/30mpa | 4500psi/30mpa | 40MPA/5800PSI |
| cooling method | water+fans | fans | fans | fans | water+fans |
| Working cycle | 5 hours continous working | 30minutes working /20minutes cooling | 30minutes working /20minutes cooling | 30minutes working /20minutes cooling | 10hours continous working |
| Max filling tank | 6.8L | suggest <1.5L | suggest <1.5L | suggest <1.5L | over 20L |
- This CS4 PCP compressor has a new upgraded 350W motor , and adopts four-stage compression technology. It is very stable when working, and it is very quiet with only 70db. Maximum filling 5800Psi/40Mpa.Notice :First confirm the maximum safe pressure of your gas cylinder, do not over-inflate, otherwise it will cause safety problems. At the same time, it is equipped with a double-pointer pressure gauge, and the two-level setting auto-stop pressure, which is more secure.
- A water tank and a grease tank are designed on the top of the compressor. The excellent cooling can achieve 5 hours of continuous work and can fill a maximum 6.8L gas cylinder. Note: For the first use, it must be filled with about 500ml of neutral distilled water or antifreeze ( PH is about 7).Note: 1) Be sure to add neutral antifreeze if it freezes in your area. 2）:Do not turn the grease knob until after 4-6 hours of use, otherwise will cause bad performance. then turn it one turn.
- 15% Faster Filling Speed: Filling 0.5L tank from 3000Psi to 4500psi ,only needs 4-5 minutes. Filling 0.5L from 0-4500psi, only needs 14-16 minutes. Filling 6.8 liter bottle from 0-4500psi ,2 hours and 40 minutes
- 12V DC input, you can use car battery or household outlet for power supply, equipped with 110V-12V converter. The machine is equipped with a built-in oil-water separator which never needs to be replaced, so you don't need to buy other external oil-water separators.
- Please read user manual carefully before turning on compressor. All GX pump come with 12 months warranty service and life time technology support. Product size: 11.8*6.1*12.4 inch , weight: 29lb. ATTENTION: when filling is complete, please release the bottle valve first (when filling bottle) and then open compressor's bleed valve to release line pressure . All pressure must be released from compressor before starting.
| Brand | GX pump |
| Voltage | 12 Volts |
| Recommended Uses For Product | Air Rifle, Paintball |
| Power Source | Corded Electric |
| Noise Level | 70 dB |
- Choosing a selection results in a full page refresh.